History Log

Description

Competitive Local Exchange Carrier (CLEC) end-users must select an inter-Local Access and Transport Area (interLATA) long distance and an intraLATA local long distance carrier to carry their local long distance and long distance service or specify they do not want to presubscribe to a specific carrier. End-users may select the same carrier for both services, different carriers for each long distance service, or completely decline the selection of a carrier. The Primary Interexchange Carrier (PIC) code designates the interLATA carrier selected by the end-user to carry long distance calls. The Local Primary Interexchange Carrier (LPIC) code designates the intraLATA carrier selected by the end-user to carry local long distance calls. Each long distance carrier is assigned a four-digit code for PIC and LPIC designation.

• PIC - InterLATA: Outside the LATA boundaries; long distance calls made from inside one LATA or state to another LATA or state.
• LPIC - IntraLATA: Within the LATA boundaries; local long distance calls made from one location to another within the LATA or outside their local calling area.

Your end-users can dial 101XXXX and utilize a long distance company other than the one they have PIC/LPIC'd as their long distance carrier of record. In addition, if your end-user is PIC/LPIC'd to 'NO', they still have the ability to dial 101XXXX and make long distance calls using the carrier of their choice. The end-user will be billed for long distance calls using the 101XXXX by the 101XXXX provider. If the 101XXXX provider has a billing arrangement with Qwest, the Reseller will be billed by Qwest for these calls.

If your end-user is changing their long distance provider from a reseller of long distance to an Interexchange Carrier (IXC) and there is no change in PIC or LPIC, the end-user needs to notify both the reseller and IXC to make appropriate billing changes. The LSR process is not needed to accomplish this change.

Availability

Long Distance Carrier Selection is available throughout Qwest's 14-state local service territory.

Terms and Conditions

CLECs shall designate the PIC and LPIC assignments, via the LSR process, on behalf of their end-users for interLATA and intraLATA services. CLECs shall follow all applicable laws with respect to PIC and LPIC assignments.

Since only the CLEC has the ability to make PIC and LPIC changes to the end-user account during the LSR process, PIC and LPIC freezes are not necessary on resold accounts.

Pricing

Rate Structure

There are no recurring charges associated PIC and LPIC changes. The PIC/LPIC change charge is a nonrecurring rate element charged to you when your end-user changes their PIC or LPIC designation.

Rates

Per your Interconnection Agreement, you will be charged the PIC/LPIC change charge when your end-user changes long distance or local long distance carriers.

Tariffs, Regulations and Policies

Tariffs, regulations and policies are located in the state specific Tariffs/Catalogs/Price Lists.

Features/Benefits

Features	Benefits
End-users select their preferred long distance carriers	Enables end-users to use 1+ dialing to access their choice of long distance carriers

Applications

See Features/Benefits.

Implementation

Prerequisites

If you are a new CLEC and are ready to do business with Qwest, view Getting Started as a Facility-Based CLEC or Getting Started as a Reseller. If you are an existing CLEC wishing to amend your Interconnection Agreement or New Customer Questionnaire, additional information is located in the Interconnection Agreement.

Pre-Ordering

General pre-ordering activities are described in the Pre-Ordering Overview.

Requirements for pre-ordering are described in Local Service Ordering Guidelines (LSOG) Pre-Order. The Interconnect Mediated Access (IMA) Service Availability Pre-Order functionality allows a CLEC to verify that the carrier selected by the end-user can be supported in a particular Qwest Central Office (CO). Contact your Qwest Service Manager if you require additional information.

Ordering

General ordering activities are described in the Ordering Overview.

Include the selection of your end-user's requested PIC and LPIC when submitting your service request for new service, transfer of service or changes to the long distance carrier. Long distance carrier selection requests are submitted using the following LSOG forms:

• Centrex Resale Services (CRS)
• Port Service (PS)
• Resale Services (RS) (For Resale and Commercial local exchange services products, e.g. Qwest Local Service Platform™ (QLSP™))

PIC code choices are:

• Valid PIC code
• "NONE"
• "DFLT"

Note: Qwest translates NONE and DFLT to "No Carrier Selected". The CSR entry will be NONE.

LPIC code choices are:

• Valid LPIC code
• "NONE"
• "DFLT"

Note: Qwest translates NONE to "No Carrier Selected." The CSR entry will be 9199. Qwest translates DFLT to "Qwest Carrier Selected". The CSR entry will be 5123.

You may send bulk requests for PIC and/or LPIC changes by utilizing the Bulk Request to Create (BRC) functionality. Requests for up to 100 accounts via a single request are accepted but must be submitted via IMA Graphical User Interface(GUI) only.

IMA accepts the BRC and mechanically creates multiple LSR's, one LSR for each account shown on the BRC. BRC's accepted by IMA cannot be supplemented. Supplemental activity must be submitted on individual LSR's if desired.

Bulk PIC/LPIC change requests apply at the account level only and requests must be for the same combination of PIC/LPIC values. The PIC and LPIC values themselves do not need to be the same CIC code. (Example: PIC is changing to 0123 and LPIC is changing to 4567 on all of the numbers submitted on the bulk request).

Manual handling cannot be requested on a bulk PIC/LPIC change request. All LSRs created are flow through eligible.

PIC/LPIC change refers to a change of either the InterLATA or IntraLATA carrier selection on an end-user's account.

Field entry requirements are described in the LSOG. For LSOG purposes, PIC is defined as InterLATA Pre-Subscription Indicator Code and LPIC is defined as IntraLATA Pre-Subscription Indicator Code. Your service request may be for PIC and/or LPIC changes only or concurrent with other service request activity.

Service interval guidelines are located in the Service Interval Guide (SIG). If a PIC and/or LPIC request accompanies other service request activity, the applicable interval will be that associated with the service or change in service requested.

Qwest can only accept PIC and LPIC changes from you on behalf of your end-users. If an interexchange carrier tries to submit a PIC or LPIC change on one of your accounts, their change request will be rejected.

Provisioning and Installation

General provisioning and installation activities are described in the Provisioning and Installation Overview.

Maintenance and Repair

General maintenance and repair activities are described in the Maintenance and Repair Overview.

Billing

Customer Records and Information System (CRIS) billing is described in Billing Information - Customer Records and Information System (CRIS).

Qwest will accept PIC and LPIC changes only from you on behalf of your end-users. Therefore, Qwest will not become involved in any PIC and/or LPIC disputes between you and your end-users.

Qwest's PIC and LPIC Verification Process allows you to electronically submit a batch file to verify the PIC and LPIC programmed in the switch for your end-users. Information about the PIC and LPIC Verification Process is located in Qwest Interconnect OSS Electronic Access and in the PIC and LPIC Verification Job Aid.

Training

Local Qwest 101 "Doing Business with Qwest"

• This introductory web-based training course is designed to teach the Local CLEC and Local Reseller how to do business with Qwest. It will provide a general overview of products and services, Qwest billing and support systems, processes for submitting service requests, reports, and web resource access information. Click here to learn more about this course and to register.

IMA "Hands On"

• This introductory instructor-led training course teaches you how to use Qwest's IMA Graphical User Interface (GUI) to order wholesale products. You will experience interactive software demonstrations and participate in hands-on practice sessions to familiarize yourself with the IMA GUI system. Click here to learn more about this course and to register.

View additional Qwest courses by clicking on Course Catalog.

Contacts

Qwest contact information is located in Wholesale Customer Contacts.

Frequently Asked Questions (FAQs)

This section is currently being compiled based on your feedback.

Last Update: July 2, 2007

Qwest Local Services Platform™ (QLSP™) is a Trademark of Qwest Communications International Inc.